MicroStrategy ONE

Creating a Project Source

If you selected option 4 in Creating a response.ini File, you can create project sources, as described in the procedure below.

To Create a Project Source

  1. In the prompt that asks for a project source name, type the name for the project source to be created and click Enter. You are then prompted to provide the Intelligence Server name.
  2. Type the Intelligence Server name and click Enter. You can also click Enter without typing any information to accept the default Intelligence Server. You are then prompted to provide a TCP port to use for Intelligence Server.
  3. You can use the default port number or enter a different port number for Intelligence Server, as described below:
    • Leave the prompt blank and click Enter to use the default port number.
    • Type a port number and click Enter.

    You are then prompted to define a time interval for a project source connection time out.

  4. Type a numerical value (in minutes) for the amount of inactivity that is allowed before a user is automatically disconnected from a project source. This enforces a connection time out for inactive users connected to a project source. Type 0 to define that users are not disconnected from project sources due to inactivity. Click Enter.

    You are then prompted to select an authentication type for the project source.

  5. You can type the corresponding number to select one of the authentication types listed in the command line. For information on each authentication type, see Modes of Authentication in the System Admin Guide.

    You are then prompted to provide a name for the response.ini file.

To Generate a response.ini File

  1. By default, the configuration is saved as Response.ini in the /HOME_PATH/ directory, where HOME_PATH is the directory you specified as the Home Directory during installation. You can leave the field blank to use the default name or type a different name and click Enter. The response.ini file is generated, and you are prompted whether to run the configuration immediately.
  2. You can choose to run the configuration you just completed or to run the configuration using the response.ini file at a different time, as described below: