자동 설치 완료

자동 설치를 실행하려면 옵션 파일을 실행한 다음 MicroStrategy 설치 마법사. 옵션 파일을 다음과 같이 저장하십시오. options.txt. 의 예 options.txt 파일은 다음에서 제공됩니다. 옵션 파일의 예 아래에. 예제를 템플릿으로 사용하고 기울임꼴 텍스트를 자신의 정보로 바꿀 수 있습니다.
이 옵션 파일 또는 응답 파일은 명령줄 인수와 함께 사용됩니다. -options 마법사 설정을 수정하려면 마법사에 대해 지정할 수 있는 설정은 다음 섹션에 나열되어 있습니다. 자동 설치를 위한 매개 변수.
하나 이상을 설치하려는 컴퓨터에 로그온합니다. MicroStrategy 제품.
시스템 관리자에게 네트워크 위치의 파일 공유를 요청하여 설치 파일에 액세스할 수 있습니다.
찾아보기 MicroStrategyInstallation/QueryReportingAnalysis_Linux 예배 규칙서.
열려 있는 options.txt 텍스트 편집기에서.
문자를 대체하여 설정 값을 지정합니다. Value. 제공될 수 있는 매개변수 및 값에 대한 자세한 내용은 options.txt 자동 설치용 파일은 다음을 참조하세요. 자동 설치를 위한 매개 변수.
변경 사항을 options.txt 파일.
자동 설치에서 옵션 파일을 사용하려면 다음을 지정하십시오. -silent -options <FileName> 마법사에 대한 명령줄 인수로, 여기서 <FileName> 이 옵션 파일의 이름입니다. 예를 들어, options.txt.

예를 들어 다음 명령을 입력합니다.
복사
```
./setup.sh -silent -options <path of the options.txt file>
```
옵션 파일의 예

이 예를 복사하여 붙여넣어 options.txt 파일. 모든 파일 경로에 올바른 공백과 새 줄이 있는지 확인하세요.
이 예에 나열된 각 옵션에 대한 설명은 다음을 참조하세요. 자동 설치를 위한 매개 변수.
아래 예에서는 전체 설치 파일 세트를 사용하여 다음을 지원한다고 가정합니다. MicroStrategy 설치. 다음 작업에 필요한 .tzp 파일의 하위 집합만 다운로드한 경우 MicroStrategy 설치하려면 다음에 설명된 매개변수를 사용하여 이러한 파일이 저장되는 위치를 정의해야 합니다. 주문형 설치 옵션.
options.txt 파일의 예를 보려면 여기를 클릭하세요.
복사
## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ##
#
# Options File Template
#
# This file is a options file (i.e., response file) for the MicroStrategy
# Installer. The options file is loaded by default if it is named "options.txt"
# and it is located in the same directory as setup.sh. 
# An alternative options file can be specified by using "-options" on 
# the command line.
# 
# The settings that can be specified for the wizard are listed below. To use
# this template, follow these steps:
# 
#    1. Enable a setting below by removing leading '###' characters from the
#    line (search for '###' to find settings you can change).
# 
#    2. Specify a value for a setting by replacing the character's '<value>'.
#    Read each setting's documentation for information on how to specify its
#    value.
# 
#    3. Save the changes to the file.
#
#    4. Launch the installation using the setup.sh script
#  
#
# We are working to improve our Silent and Automated installation use-cases.  Feedback on 
# Silent or Automated installations is welcomed via the MicroStrategy Community (Platform
# Services > Platform > Secure Enterprise - Linux) or via Technical Support to the Deployment Team.
#
# Here is a direct link (as of June 2017) to the Community sub-section on platform deployment:
# https://success.microstrategy.com/s/topic/0TO44000000FlkIGAS/Secure%20Enterprise%20-%20Linux%20-%20U092?tabset-215d6=1
#
#


## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ##
#
#   Silent Installation.
#
#   The options file is required for silent installations, specify -silent 
#    -options <file-name> as a command line arguments to the wizard, where
#    <file-name> is the name of this options file.
#
#       For example:
#
#    setup.sh -silent -options options.txt
#


## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ##
# 
#    System Requirements Warnings
#
#    The silent installation will install MicroStrategy even if some system 
#     requirements are not completely meet. 
#    Please read the release notes file and configure your system so it meets the 
#     requirements before running this setup and check the installation log after 
#    the installation is complete.
#      


## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ##
#
# Installation Properties
#
# Please specify general installation properties.

## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ##
#
# MicroStrategy License Agreement Default Selection
#
# In the MicroStrategy Installation Wizard, it is legally required to accept the
# MicroStrategy License Agreement in order to proceed with the desired installation
# operation.
# Use this option to specify the default selected option selected for the License 
# Agreement Dialog. Legal values are:
#
#    true    - Accept the License Agreement
#    false    - Do not accept the License Agreement
#
# If no option is provided, 'reject' is used as default.

### licenseAgreement.accept=<value>


## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ##
#
# Customer Information
#
# Please specify your name, the name of the company for which you work and the 
# license key.

# User
### userRegistration.user=<value>

# Company
### userRegistration.company=<value>

# License Key
### userRegistration.cdKey=<value>


## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ##
#
# MicroStrategy Installation Selection
#
# For a new Installation, use "new" (i.e. install.Instance=new)
#
# For an existing Installation, specify its home path.
# Home path is a directory that identifies an installation and stores 
# configuration files and application launchers (suite.homeDirectory in 
# MicroStrategy Install Locations section). You may refer to <home> tag under 
# <suite>MstrSuite</suite> in mstrinstall.xml.
#
#       For example 
#
#       install.Instance=/home/user/MicroStrategy
#

### install.Instance=<value>

## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ##
#
# MicroStrategy Operation to perform on instance
#
# For a new Installation, Legal values are: 
#    FRESH_INSTALL  - Indicates a new installation will be performed
#
# For an existing Installation, Legal values are: 
#    MODIFY            - Indicates the installation will be modified.
#    REPAIR            - Indicates the installation will be repaired.
#    UNINSTALL         - Indicates the installation will be uninstalled.
#    UPGRADE           - Indicates the installation will be upgraded
#    REMOVE_UPDATE     - Indicates a update package will be removed
#
#       For example 
#
#       install.Operation=MODIFY
#

### install.Operation=<value>

## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ##
#
# MicroStrategy Install Locations
#
# The install locations of the product. Specify a valid directories into which 
# the product should be installed.
# It is recommended to specify a different directory for each one of the install 
# locations:
#
#  Home    - This directory will store configuration files and application launchers
#  Install - This directory will store all the binaries and other static files
#  Log     - Application logs will be created here.
#
# NOTE: Special characters (!,%,$,^,\,?,#) and space characters are not valid. All
# special characters will be ignored.

### suite.homeDirectory=<value>

### suite.installDirectory=<value>

### suite.logDirectory=<value>


## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ##
#
# MicroStrategy Product Selection State
#
# A selection state setting is available for every MicroStrategy product. 
# Legal values are:
# 
#    true  - Indicates that the product is selected for installation
#    false - Indicates that the product is not selected for installation
# 
# The default value for Selection state settings is "true".
#
# For example, to select "MicroStrategy Intelligence Universal Edition"
# for installation use
# 
#    Intelligence.active=true
#
# All licensed products are selected by default, so in case you want to prevent 
# them from being installed make sure they are unselected too.


## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ##
#
# MicroStrategy Intelligence Universal Edition
#
#  MicroStrategy Intelligence Universal Edition will be automatically
#  selected for installation if any of the following products are selected for
#  installation:
#       "MicroStrategy Report Services Universal", 
#       "MicroStrategy OLAP Services Universal"
#       "MicroStrategy Distribution Services"
#       "MicroStrategy Transaction Services"

# MicroStrategy Intelligence Universal Edition
### Intelligence.active=<value>

#   MicroStrategy Report Services Universal
### ReportServices.active=<value>

# MicroStrategy OLAP Services Universal
### OLAPServices.active=<value>

# MicroStrategy Distribution Services
### DistributionServices.active=<value>

# MicroStrategy Transaction Services
### TransactionServices.active=<value>



## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ##
# MicroStrategy Web Universal
#
#  MicroStrategy Web Universal Reporter will be automatically selected for
#  installation if MicroStrategy Web Universal Analyst is selected.
#
#  MicroStrategy Web Universal Reporter & Analyst will be automatically selected
#  for installation if MicroStrategy Web Universal Professional is selected.


# MicroStrategy Web Universal Reporter
### WebReporter.active=<value>

# MicroStrategy Web Universal Analyst
### WebAnalyst.active=<value>

# MicroStrategy Web Universal Professional
### WebProfessional.active=<value>

# MicroStrategy Portlets
### Portlets.active=<value>

# MicroStrategy GIS Connectors
### GISConnectors.active=<value>


## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ##
#
# MicroStrategy Web Services J2EE

### WebServices.active=<value>


## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ##
#
# MicroStrategy Mobile Server JSP

### MobileServer.active=<value>


## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ##
#
# MicroStrategy Community Connectors
# 

### CommunityConnectors.active=<value>


## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ##
#
# MicroStrategy Command Manager

### CommandManager.active=<value>


## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ##
#
# MicroStrategy System Manager

### SystemManager.active=<value>


## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ##
#
# MicroStrategy Platform Analytics

### PlatformAnalytics.active=<value>


## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ##
#
# MicroStrategy Enterprise Manager

### EnterpriseManager.active=<value>


## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ##
#
# MicroStrategy Integrity Manager

### IntegrityManager.active=<value>


## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ##
#
# MicroStrategy Telemetry Server

### TelemetryServer.active=<value>


## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ##
#  
# New in 10.9
# MicroStrategy Library Web & Mobile

### LibraryWebMobile.active=<value>


## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ##
#
# New in 10.9
# MicroStrategy Collaboration

### Collaboration.active=<value>


## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ##
#
# New in 11.0
# MicroStrategy Certificate Store

### CertificateStore.active=<value>


## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ##
#
# New in 11.2
# MicroStrategy Export

### Export.active=<value>


## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ##
#
# New in 11.2
# MicroStrategy Repository

### Repository.active=<value>

## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ##
#
# New in 11.3
# MicroStrategy Cloud Object Connector

### CloudObjectConnector.active=<value>

## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ##
#
# Product Install Location.
# Use the following values to specify the install location for individual products.
#
# Warning: Special (!,%,$,^,\,?,#) and space characters are not valid. All special 
# characters will be ignored.

# Web Universal
### WebUniversal.deployDirectory=<value>

# MicroStrategy Portlets
### Portlets.installDirectory=<value>

# MicroStrategy GIS Connectors
### GISConnectors.installDirectory=<value>

# MicroStrategy Community Data Connectors
### CommunityConnectors.installDirectory=<value>

# MicroStrategy Web Services J2EE
### WebServices.installDirectory=<value>

# MicroStrategy Mobile Server JSP 
### MobileServer.installDirectory=<value>

# MicroStrategy Command Manager
### CommandManager.installDirectory=<value>

# MicroStrategy System Manager Install Location
### SystemManager.installDirectory=<value>

# MicroStrategy Platform Analytics Install Location
### PlatformAnalytics.installDirectory=<value>


## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ##
#
# CPU License Information
#
# This value should be specified when the license being used for MicroStrategy
# Intelligence Universal Edition is based on CPUs. Legal values are integers
# between 1 and either the number of CPUs allowed by the license or the number of 
# CPUs in the machine, whichever is lower. 
#
# For example to set the number of CPUs to 2, use:
#
# cpuCount.number=2
#
# To set this options to the maximum value allowed, use:
#
# cpuCount.number=maximum
#
# The default value for this setting is "maximum" 

### cpuCount.number=<value>


## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ##
#
# Remote Repository Connection
#
# A repository is required for the following components:
# Collaboration Server
# Platform Analytics
#
# To use a remote repository, provide the connectivity information to be used.
# https://www2.microstrategy.com/producthelp/2021/InstallConfig/en-us/Content/repository_overview.htm

### RemoteRepository.DBHost=<value>
### RemoteRepository.DBPort=<value>
### RemoteRepository.DBUser=<value>
### RemoteRepository.DBPassword=<value>


# For new installations use this option to indicate if platform_analytics_wh 
# should be dropped or preserved if it exists.
#    true    - Drop the schema and create a fresh configuration.
#    false    - Preserve the schema and upgrade it if necessary.
# The default value is false.
### PlatformAnalytics.overrideDb=<value>


# For new installations use this option to indicate if mstr_collab
# should be dropped or preserved.
#    true    - Drop the schema and create a fresh configuration.
#    false    - Preserve the schema and upgrade it if necessary.
# The default value is false.
### Collaboration.overrideDb=<value>


## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ##
#
# MicroStrategy Telemetry Server Configuration
#
# This step allows you to cluster the Telemetry Servers that will be used to send usage data to 
# Platform Analytics.
#
# If you plan to install three or more Telemetry Servers in your environment, you must check the 
# box below during the installation of each Telemetry Server. Failing to do so will result in 
# manual configuration to create the cluster after the installation.
# 
# For more information refer to the online help.
#
# Please note that Telemetry Server is installed by default when you install and Intelligence
# or Platform Analytics.

# Create a cluster of three or more Telemetry Servers
#    true    - Creates a Telemetry Server cluster
#    false    - Configures Telemetry Server as a single node.
# The default value is false.
### TelemetryServer.cluster.enable=<value>

# Provide the Fully Qualified Domain Name of the local Telemetry Server (do not use "localhost" 
# or the loopback IP address "127.0.0.1")
### TelemetryServer.cluster.localnode=<value>

# Provide the Fully Qualified Domain Name of all the remote Telemetry Servers that you have 
# installed or will install. Separate the Fully Qualified Name using semicolons. 
# For example: node.mydomain.com; othernode.mydomain.com
### TelemetryServer.cluster.remotenodes=<value>

## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ##
#
# Topology Configuration
#
# The Workstation Topology helps administrators to monitor and manage services 
# in a MicroStrategy environment.

# Indicate cluster environment.
#    SINGLE    - Choose this option if this is the only machine where the MicroStrategy 
#               services including Intelligence, Web Universal, Library, Mobile, Telemetry 
#               Server, Platform Analytics, Certificate Store will be 
#               installed for this environment. No other machines will have any of these 
#               services installed. 
#    MULTIPLE  - Choose this option if the MicroStrategy services listed above will 
#               be installed on multiple machines in this environment. 
#
# The default value for this setting is "SINGLE" 
### ServicesRegistration.machine.environment=<value>

# Enter the fully qualified domain name for one Intelligence machine below. 
# To setup a fault tolerant configuration during this installation or later, 
# review the online help. 
# https://www2.microstrategy.com/producthelp/current/InstallConfig/WebHelp/Lang_1033/Content/topology_install.htm
#
# Note: This machine must be able to communicate with other machines in this 
# environment on ports 8300 & 8301.
#
# Important: During the installation of a multiple machine environment, the value 
# above needs to be entered exactly the same for each machine in the environment.

### ServicesRegistration.serverHosts=<value>

## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ##
# Registering as a service
#
# Register MicroStrategy processes as a service so that processes automatically
# start up after system startup.
# Legal values are:
#    true
#    false
# Note: Only root users may register processes as a service.
### RegisterServices=<value>

## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ##
# Registering as a service
#
# Use this user to start the services (optional)

### RegisterServices.user=<value>
### RegisterServices.group=<value>

## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ##
#
# Hide Select Components dialog box
#
# Use this option to completely hide the product selection dialog during the
# execution of the MicroStrategy Installation Wizard. This option can be used 
# in combination with individual product visibility/state options to have better
# control on the products to be installed/removed. If the dialog is not visible,
# and no specific visibility/state options have been specified, default values
# will be used.
# Legal values for this option are:
# 
#    true  - Indicates that the Select Components dialog box will be visible
#    false - Indicates that the Select Components dialog box will be hidden
# 
# The default value for this setting is "true".

# SelectComponents.visible=<value>

## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ##
#
# MicroStrategy Product Visibility
#
# In the MicroStrategy Installation Wizard, the Select Components dialog box 
# contains check boxes to select or clear for products to be installed. You
# can specify whether you want the following products to be visible to the user. 
# Legal values are:
# 
#    true  - Indicates that the product is selected for installation
#    false - Indicates that the product is not selected for installation
# 
# The default value for Selection state settings is "true".
# 
# If a product is not visible, it will not be installed, 
# independently of the value specified for its selection state (see the
# Product Selection State section).
# 

# MicroStrategy Intelligence Universal Edition
### Intelligence.visible=<value>

# MicroStrategy Report Services Universal
### ReportServices.visible=<value>

# MicroStrategy OLAP Services Universal
### OLAPServices.visible=<value>

# MicroStrategy Distribution Services
### DistributionServices.visible=<value>

# MicroStrategy Transaction Services
### TransactionServices.visible=<value>

# MicroStrategy Web Universal Reporter
### WebReporter.visible=<value>

# MicroStrategy Web Universal Analyst
### WebAnalyst.visible=<value>

# MicroStrategy Web Universal Professional
### WebProfessional.visible=<value>

# MicroStrategy Portlets
### Portlets.visible=<value>

# MicroStrategy GIS Connectors
### GISConnectors.visible=<value>

# MicroStrategy Web Services J2EE
### WebServices.visible=<value>

# MicroStrategy Mobile Server JSP
### MobileServer.visible=<value>

# MicroStrategy Community Data Connectors
### CommunityConnectors.visible=<value>

# MicroStrategy Command Manager
### CommandManager.visible=<value>

# MicroStrategy Integrity Manager
### IntegrityManager.visible=<value>

# MicroStrategy System Manager
### SystemManager.visible=<value>

# MicroStrategy Platform Analytics
### PlatformAnalytics.visible=<value>

# MicroStrategy Enterprise Manager
### EnterpriseManager.visible=<value>

# MicroStrategy Telemetry Server
### TelemetryServer.visible=<value>

# New in 10.9
# MicroStrategy Library Web & Mobile
### LibraryWebMobile.visible=<value>

# New in 10.9
# MicroStrategy Collaboration
### Collaboration.visible=<value>

# New in 11.0
# MicroStrategy Certificate Store
### CertificateStore.visible=<value>

# New in 11.2
# MicroStrategy Export
### Export.visible=<value>

# New in 11.2
# MicroStrategy Repository
### Repository.visible=<value>

# New in 11.3
# MicroStrategy Cloud Object Connector
### CloudObjectConnector.visible=<value>


## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ##
#
# Install On Demand Options
#
## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ##

# The kind of remote location. The valid values are "FileSystem", "HTTP" or "HTTPS"
### InstallOnDemand.style=<value> 

# The path to the remote location. Set this value if InstallOnDemand.style is set to "FileSystem"
### InstallOnDemand.sourceLocation=<value>

# The URL for HTTP or HTTPS styles. Set this value if InstallOnDemand.style is set to HTTP or HTTPS 
### InstallOnDemand.url=<value>

# Use this setting to skip the certificate checking when using HTTPS. Valid values are "true" or "false"
### InstallOnDemand.bypassCertificateChecking=<value>

# The user name for HTTP or HTTPS styles. Set this value if InstallOnDemand.style is set to HTTP or HTTPS 
# and the connection requires user name and password
### InstallOnDemand.user=<value>

# The password for HTTP or HTTPS styles. Set this value if InstallOnDemand.style is set to HTTP or HTTPS 
# and the connection requires user name and password 
### InstallOnDemand.password=<value>

# Configuration and Deployment Guide: http://www2.microstrategy.com/producthelp/2020/InstallConfig/en-us/Content/configuration_and_deployment.htm